Powered Walk Behind Die Cart

Features

  • 2,500 lbs. capacity at 18” load center
  • Powered push/pull mechanism for die load/unload
  • Welded and utilized platform with fork support
  • 2 roller lift chains – 9,000 lbs. yield each
  • 24v operation, emergency disconnect button
  • Full feature tilter handle with keylock switch, stepless forward/reverse control, lift and lower control, horn button, safety belly button switch
  • 225 AH batteries with 25 amp on-board charger with powered vent, battery indicator, hour meter, low charge lift limit
  • Hydraulic check valve on lift cylinder

Tell us about your challenges, you’ll like our solutions.

Contact Us

Specifications

Model Number
HPWB-3063-25
Wheel Size Front 5″ x 3″
Wheel Size Drive 10″ x 3″
Platform Length Dim. A 30″
Platform Length Dim. B 32″
Legs ID 24-5/8″
Legs OD 32-1/2″
Overall Length Dim. C 63″
Overall Length Dim. D 81″
Load Center 18″
Platform Lowered Height 11″
Platform Raised Height 63″
Machine Weight 1,850 lbs.
Maximum Die Weight 2,500 lbs.